A few weeks ago there was considerable activity on Boot Loaders, just a 
quick question without a lot of detail, just wanted to make sure there 
wasn't some obvious roadblock.

I have a 18F1320 (slave) that has USART going to onboard fiber optic 
transmitter/receiver (62.5/125um) that is then converted to 2 wire 
RS-485 with a B&B FOSTC converter and then to a PLC (TRI-PLC 
T100MD888)(master). The PLC is programmable and online 
monitoring/control via RS-232 to a PC. I also have a RS-232/RS-485 
converter and have talked to the PIC over the Fiber optic/Rs-485 network 
with a terminal program. I am thinking that either I can use the 
RS-232/RS-485 converter to use the boot loader (after having programed 
the 1320 with the boot loader) from a PC, or via the PLC which has been 
programmed to pass through the 1320 program.

Comments?

Thanking in advance. :)

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist