In SX Microcontrollers, SX/B Compiler and SX-Key Tool, stef wrote:

Hi

To answer your question.

The sx28 DIP version is on my own PCB. I tried everything out on a the developmentboad, then I designed my own PCB. I had it made, but I placed the components on it.

I understand your remark of the 50 Mhz but wy is it then running fine on the sx key. I pluged that also in on my PCB and run it on 50 Mhz. The traces use for the resonator are the same as when using the sxkey. 

The reset line I always pull up with a 10K to 5V. Hope this is good as with the sxkey it creates no problem.

stef

---------- End of Message ----------


You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=263075#m263094

Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com

The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2008 (http://www.dotNetBB.com)