In SX Microcontrollers, SX/B Compiler and SX-Key Tool, stef wrote:

Hi
 

I made some nice projects with the sx28. With my latest project I have some problems. It is running fine on my sx Key. So the coding is casing no problem. When I run on the resonator it is starting but after a few minuts it is restarting, and so on. Te time between restarts is not ecual. Sometimes it is running for 15 minuts befor it is doing that, sometimes it is after a minut. If I swap back to the sx key I dont have that problem. I can run several hours without any problem. I used different resonators (50 Mhz) with the same result. I checked my power and that is no problem. It is stable. It has to be something with the resonator. I use them from Parallax. What I 'm not sure of it if I need to use aditional capacitor's and a resisteor parallel to the resonator? Hase sombody hade the same issue?

 

Thanks in advance for the reply.

 

Stef

---------- End of Message ----------


You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=263075

Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com

The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2008 (http://www.dotNetBB.com)