> Actually it does not work!
> I define as recommended:
> #define lmot_dir PORTE,0
> then code as follows:
> BCLR lmot_dir
> when I build I get the following error:
> BOT_1.s:90: Error: Too few operands ('bclr lmot_dir')

Is the problem with #define or bclr ? I've not used the dsPIC so
can't help you from experience but looking at the instruction set
in the user guide, there appear to be two forms of bclr - bclr.b
and bclr.w

bclr (with no .b or .w) is by default bclr.w. Perhaps if you try

bclr.b lmot_dir  or  bcf lmot_dir

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist