--===============0333004638==
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: quoted-printable
X-MIME-Autoconverted: from 8bit to quoted-printable by pch.mit.edu id m321SuL0029710

J,
It all depends on quantity.
I use electroplated tin sheets from hobby store to make by hand 10-30 pie=
ces.

A few years ago I did IR preamp shield about the same size you want.
It cost me $300 tooling but only $0.02 each at 1,000 pcs per shipment.
>From Thailand.
Ray


On Tue, 01 Apr 2008 13:48:15 -0700, Jesse Lackey wrote:
>=A0Hello all, I'm working on Zigbee module designs, and one regulatory
>=A0requirement is to have the RF section at least under a metal "lid",
>=A0basically a 5-sided thin aluminum "box". =A0These are going to be
>=A0made in high volumes, so paying NRE for something custom is not a
>=A0problem.
>
>=A0Ideally it would be around 0.7" square and 150mils tall. It has to
>=A0be SMT though.
>
>=A0Has anyone sourced these?
>=A0I'm doing the standard google searches but tips much appreciated.
>
>=A0Thanks!
>=A0J





--===============0333004638==
Content-Type: text/plain; charset="us-ascii"
MIME-Version: 1.0
Content-Disposition: inline
Content-Transfer-Encoding: 7bit

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist

--===============0333004638==--