In SX Microcontrollers, SX/B Compiler and SX-Key Tool, bowhunter wrote: [3]Hello,[/3] [3]I am working on a PINK project. I have an SX28 sending outside temperature and inside temperature to the PINK. The outside temperature is obtained from a 433MHz RF receiver and the inside temperature is via a LTC1298 and a LM34 mounted alongside the SX. I successfully accomplished this and can view the temperatures on a web page loaded in the PINK. The web page will also let me change the contents of PINK Variable Number 10 to a 1 or 0 via a Radio button (verified via PINK).[/3] [3]Here is what I am having trouble doing. I want to check the contents of Variable #10. If it is a one (1) then I want to make RC.1 go high, thus triggering an SSR. I am monitoring the RC.1 pin with an LED and nothing happens, it appears that the SERIN statement is timing out or my code is not detecting the ASCII one("1").[/3] [3]BTW, I have done this with the BS2.[/3] [3]Working code is attached, it does contain un-used subroutines. Any help/suggestion you may offer will be much appreciated.[/3] [3]MikeS[/3] ---------- End of Message ---------- You can view the post on-line at: http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=259659 Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2008 (http://www.dotNetBB.com)