In SX Microcontrollers, SX/B Compiler and SX-Key Tool, George Herzog wrote:

Well, I located the problem, so I won't bother with the screenshot.  My DPI was set at 120DPI which is not the standard 96DPI. I suspect that I changed it [before I bought new reading glasses] and forgot. By reverting to the standard 96DPI the Debug Screens are now complete.  I suspect other clock screen will fit properly too.

This is quite odd as it is only a graphic issue in Debug.  It seems obvious that it was compiled in a different way or from a different source.

I'll stay with the 96DPI default.  

Thanks ever so much as I prefer to use the SX-Debug with the SX-Key instead of the SX-Sim.  At times, the SX-Sim stops and I don't really understand why.  It has something to do with the RTCC options configuration.  I will eventually figure it out.

---------- End of Message ----------


You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=250667#m251113

Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com

The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2008 (http://www.dotNetBB.com)