I have finally got some time to continue investigating Interworking
Ethernet.  Even enrolled in ccna 1 & 2 course in a hope that it may
help.

Jorge: (If you are still on channel)

I have been enjoying reading your PICDEM2 how to at
http://www.ljcv.net/projects/picdem2/index.html

I dont have a picdem2 board (but considering the investment) so was
interested in page you refer to below.

There is a link at "here is a page" in the following line ...

"If you don't have a PICDEM 2 Plus, don't worry you can put together a
similar design using the nic28 on a solderless prototype board, here
is a page showing how to put this project together."

but when I click on it http://www.ljcv.net/projects/pic18-nic28/ I get
Error 403 - Forbidden
You tried to access a document for which you don't have privileges.

If it is possible to make this link available I would really enjoy reading it.

Cheers Justin

PS Great reading Thanks
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist