In SX Microcontrollers, SX/B Compiler and SX-Key Tool, Rsadeika wrote:

zoot, thanks for taking the time to look at my program. You say "After processing, you need to clear hasCmd ...", actually I thought I was doing that in the the 'main' loop. I setup an hasCmd = 0 after it came back from the processing routine, evidently you must be thinking of a different way of doing it.

I wrote a small non-interrupt version of the program, and ran that, with the same problem occuring. Thinking that it might be a hardware problem, I pulled out a second brand new Create, and the same thing occurs with that one, testing both of the programs on it. So, now I am really stumped as to what the problem could be. The only thing left is try a different demodulator, but I thought with those things it was either they worked or they did not work.

The second program that I wrote, I was trying to implement a State Machine technique, so if I ever solve this puzzle, I will finish the second program, and post it.

Thanks

Ray

---------- End of Message ----------


You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=249411#m249653

Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com

The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2008 (http://www.dotNetBB.com)