Hi all http://www.idinet.com/choosecountry.aspx?url=%2findex.aspx%3f I use these guys (IDI) for RF pogo pins mostly but they have the smaller digital signal/high density ones too. Best Regards, Phillip Coiner, Chief Technology Officer GPS Source, Inc. 64 N. Mission Drive Pueblo West, Co 81007 Phone: 719.510.4552 E-mail: pcoiner@gpssource.com cid:image001.jpg@01C76FB5.FC0AD300 Your source for quality GNSS Networking Solutions and Design Services -----Original Message----- From: piclist-bounces@mit.edu [mailto:piclist-bounces@mit.edu] On Behalf Of PAUL James Sent: Tuesday, February 12, 2008 7:43 AM To: Microcontroller discussion list - Public. Subject: RE: [PIC] Pogo pins ICSP All, Try "QA Technology" for pogo pins. We use them in our test fixtures. They have a wide variety of pins, receptacles, pin patterns, etc. They have excellent quailty products, and very reliable. And if you only need a few, they will send you samples free of charge. Regards, Jim -----Original Message----- From: piclist-bounces@mit.edu [mailto:piclist-bounces@mit.edu] On Behalf Of Joe Bento Sent: Tuesday, February 12, 2008 8:20 AM To: Microcontroller discussion list - Public. Subject: Re: [PIC] Pogo pins ICSP They are also available through Newark here in the USA. Farnell owns Newark, and Newark seems to be the US extension of the Farnell website. Joe Alan B. Pearce wrote: >> And where do you get pogo pins ? >> > > Farnell. Pogo pins are available from Harwin in the UK, through Farnell. > Search for "Harwin probe" on the farnell website, and there is a whole > variety pith pointed, concave, or serrated ends. > > > -- http://www.piclist.com PIC/SX FAQ & list archive View/change your membership options at http://mailman.mit.edu/mailman/listinfo/piclist -- http://www.piclist.com PIC/SX FAQ & list archive View/change your membership options at http://mailman.mit.edu/mailman/listinfo/piclist -- http://www.piclist.com PIC/SX FAQ & list archive View/change your membership options at http://mailman.mit.edu/mailman/listinfo/piclist