> Bob Axtell <engineer <at> cotse.net> writes:
>> "If there are OpAmps in a design, terminate unused opamps 
>> in dual
>> or quad packs by grounding the positive input to ground, 
>> then connecting
>> the negative input to the output."

> "Always assuming that the Opamps have input-to-ground 
> specification" (unlike
> certain popular FET input opamps ...

The writer of that advice MAY have been living in a dual 
rail only world where ground is always well away from the 
rails.


        Russell.


-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist