Bob Axtell <engineer <at> cotse.net> writes:
> "If there are OpAmps in a design, terminate unused opamps in dual
> or quad packs by grounding the positive input to ground, then connecting
> the negative input to the output."

"Always assuming that the Opamps have input-to-ground specification" (unlike
certain popular FET input opamps ...

The rule of thumb is that there is no rule of thumb. Connecting the unused +
inputs to a bias source in the CMMR range and the outputs to the - inputs would
be a valid way to nail it I think. Excepting for noise and other factors like RF
rectification.

Peter P.


-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist