I'm experimenting with analog switches/muxes ('4051 and '4066)--my first
time. When selected, the resistance of all switches is as expected, <150
ohms, but when control signal is low R varies from 20-50K among channels,
always way lower than spec. If power removed, all channels' resistance is in
spec.

My first thought was my meter, a garden-variety $20 job, but it seems to be
working fine.

Thanks all,

Don

===============
Don Rahmlow
Ramfish Golf
www.ramfish.com
===============


-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist