In SX Microcontrollers, SX/B Compiler and SX-Key Tool, jmevans wrote:

I recently purchased one of these LED display units for $1.00
[url=http://www.allelectronics.com/cgi-bin/item/DSY-1/345/MULTIFUNCTION_LED_DISPLAY_MODULE_.html]http://www.allelectronics.com/cgi-bin/item/DSY-1/345/MULTIFUNCTION_LED_DISPLAY_MODULE_.html[/url]

 

I see that David Cook at Robot Room has used them with a Atmel AVR ATtiny

[url=http://www.robotroom.com/MultiSegmentLEDDisplay.html]http://www.robotroom.com/MultiSegmentLEDDisplay.html[/url]

 

From looking at the data sheets for the ST2225 that is used

[url=http://www.siti.com.tw/product/spec/LED/ST2225A.pdf]http://www.siti.com.tw/product/spec/LED/ST2225A.pdf[/url]

I see that I need to use a clock signal and send 36 bits at a time.

 

I would like to experiment with using this display with the SX,

could any one share a little sorce code in SXB that would work

with this unit?

 

Thanks

Mark

---------- End of Message ----------


You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=245884

Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com

The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2008 (http://www.dotNetBB.com)