On 24 Jan 2008 at 9:36, Dumitru Stama wrote:

> I only have about 5v as VCC and it is a bit hard to supply the amp
> with enough juice. I have already sent 0xFF to PORTD and i have
> voltages close to VCC on every pin. 

	That shows the PIC is supplying enough current.


> I will try to build it again with
> 100k and 200k resistors and check the voltages step by step, after
> each part : 1bit, 2bits, ..... 8 bits.
> -- 

	It would be a waste of time due to the 0xFF test 
you already did.

	Why don't you show us your circuit? I bet there 
is something wired wrong.

	MJ


-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist