In SX Microcontrollers, SX/B Compiler and SX-Key Tool, djh82uk wrote:

Hi PJ

Yes that is how I have it connected, RA.0 going in between the 2 resistors, and also the one leg of the cap, my cap says it's a 104 or 103, and my resistors are 10k, but this is where I see a problem, 4.8V say through a 100k resistor, shows as 0v at the other end, so regardless whether the voltage is coming from the power source or from RA.1, RA.0 never sees above 0v it seems.

Any Ideas?  Im sure it's something stupid on my part.

DJH

---------- End of Message ----------


You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=244365#m245188

Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com

The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2008 (http://www.dotNetBB.com)