Actually not :(
I am trying to replace the 3.2v power supply for the dataflash with a 3v3
regulator. I am soldering as we speak.
Thank you for your suggestion


On Jan 20, 2008 6:00 PM, John Coppens <john@jcoppens.com> wrote:
> On Sun, 20 Jan 2008 17:00:33 +0200
> "Dumitru Stama" <spanac@gmail.com> wrote:
>
> > I attached the connection i am using for the chip, i should also add i
> > use 4.5v to power my circuit and ~3.2v (using a resistor circuit) to
> > power the dataflash.
>
> Just off-hand. Does the 'resistor circuit' take into account the
> increased power supply current when reading or at standby? I'd consider
> something slightly more complex (maybe just 2 Si diodes in series, if the
> 4.5 is stable.
>
> John
> --
> http://www.piclist.com PIC/SX FAQ & list archive
> View/change your membership options at
> http://mailman.mit.edu/mailman/listinfo/piclist
>
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist