Thank You Bob,

I'll try to find my old 7.4, I seem to remember it working for me too.
Tom
  *
  |  __O    Thomas C. Sefranek  tcs@cmcorp.com
  |_-\<,_   Amateur Radio Operator: WA1RHP
  (*)/ (*)  Bicycle mobile on 145.41, 448.625 MHz

ARRL Instructor, Technical Specialist, VE Contact.
http://hamradio.cmcorp.com/inventory/Inventory.html
http://www.harvardrepeater.org
----- Original Message ----- 
From: "Bob Axtell" <engineer@cotse.net>
To: "Microcontroller discussion list - Public." <piclist@mit.edu>
Sent: Friday, January 11, 2008 7:22 PM
Subject: Re: [PIC] MPLAB V8.0 stops


>I just went thru all my MPLAB versions, testing the ICD2 as I went along.
> MPLAB 7.40 seems to be the last stable version that will run an ICD2.
> That's what I am using with ICD2 at the present time.
>
> --Bob
>
>> On Jan 11, 2008 7:08 PM, Thomas C Sefranek <wa1rhp@arrl.net> wrote:
>>
>>> I foolishly loaded the new MPLAB 8.0 on my desktop and laptop.
>>> Now the laptop (using damn Vista) will only run MPLAB debugger for a few
>>> minutes.
>>> (I'm halting, tracing code, looking at registers etc when it stops.)
>>>
>>> On my desktop computer (using XP) it runs longer but will still stop 
>>> after
>>> about an hour of debugging.
>>>
>>> And I notice EVERY debugging interaction now puts up a warning that the
>>> processor is in use!  Duh!
>>> And it is DEADLY slow to finish building on either platform.
>>>
>>> What do you suggest?
>>>
>
> -- 
> http://www.piclist.com PIC/SX FAQ & list archive
> View/change your membership options at
> http://mailman.mit.edu/mailman/listinfo/piclist
>
>
>
> -- 
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.5.516 / Virus Database: 269.19.1/1219 - Release Date: 1/11/2008 
> 10:19 AM
>
> 

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist