I bought RFID kit based on PIC from ccsinfo.com

Andre



-----Original Message-----
From: piclist-bounces@mit.edu [mailto:piclist-bounces@mit.edu]On Behalf
Of John Waters
Sent: Friday, January 11, 2008 8:43 AM
To: piclist@mit.edu
Subject: [OT]: rfid reader, where to buy?



Hi All, I'm building a system that needs a rfid reader to read and write data to/from rfid tags. My main circuit board has a microcontroller with build-in UART which I plan to use to control the rfid reader. Could someone suggest where to buy such a reader that is:
1. low cost2. with RS232 interface, if not, other available interface that I can easily link with my controller board.3. preferably be a standalone unit with casing, etc., I don't want to use rfid modules if possible, since they might not have FCC approval while standalone units usually did. Actually the ideal case is, I just need to use a cable to link the reader up with my main circuit box and only need to write some firmware in my microcontroller side to control the rfid reader. 
 Thanks in advance!
_________________________________________________________________
Introducing the City @ Live! Take a tour!
http://getyourliveid.ca/?icid=LIVEIDENCA006
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist