In SX Microcontrollers, SX/B Compiler and SX-Key Tool, g_daubach wrote:

Hi all,

sorry, I forgot to mention that the SX48 DIP costs US$ 19.00 for single units. This includes shipping from Germany in an air mail envelope. The SX48 and the two filter caps are already installed by a professional PCB manufacturer. Not included are the socket pins. You have the option to either install small round pins that fit into a standard DIL48 socket, or the wider, square-shaped 1/10" pins like shown in the picture. Such pins fit into breadboards, and into standard pin sockets.

As an option, you may install header pins with longer legs on the solder side (used for wire-wrapping), as shown. They are handy for attaching test probes, and as the OSC1, OSC2, Vdd, and Vss pins are in the right order, you can also directly plug on an SX-Key or SX-Blitz. Later, when you are done with testing, you can always cut off the extensive pins, maybe only leaving the four pins for the SX-Key/Blitz in place.

Should there be a greater demand for these boards, I can send a bulk of them to my daughter in South Carolina, and she will then handle domestic shipping from there in order to reduce shipping costs.

---------- End of Message ----------


You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=239585#m240898

Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com

The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2008 (http://www.dotNetBB.com)