Bill try asking your question here.
http://tech.groups.yahoo.com/group/pic_sim_ide/

victor

----- Original Message ----- 
From: "Bill VanOrden" <beevo@cox.net>
To: <piclist@mit.edu>
Sent: Sunday, December 09, 2007 11:12 AM
Subject: RE: [PIC] BASIC serial port & variable problem


> Message: 40
> Date: Sat, 8 Dec 2007 23:19:43 -0600
> From: "Kelly Kohls" <kkohls@prodigy.net>
> Subject: RE: [PIC] BASIC serial port & variable problem
> To: "Microcontroller discussion list - Public." <piclist@mit.edu>
> Message-ID: <ONELKOEBICHJFHIDPGGPOEINFGAA.kkohls@prodigy.net>
> Content-Type: text/plain; charset="us-ascii"
>
> Bill,
>
> I'm not familiar with the language that you're using but it appears to me
> that you may be sending the control characters (@ and A) instead of the
> printable 0 and 1 characters (which have ASCII codes of 48 and 49 
> decimal).
> Try changing your code to send 48 in place of the zero and 49 in place of
> the one.
>
> Hope this helps,
>
> Kelly Kohls, N5TLE
> Bedford, TX
>
> I am using: http://www.oshonsoft.com/pic.html
>
> I am not (or not intending to) send charaters, I want to send numerical
> values.  Hyperterminal shows what I assume to be everything but the
> unprintables in it's window.
>
> I need numerical values to come out the other end at the PC.
>
> Beevo
>
>
> -- 
> http://www.piclist.com PIC/SX FAQ & list archive
> View/change your membership options at
> http://mailman.mit.edu/mailman/listinfo/piclist
> 

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist