I know in the older versions, there is a dialog box *somewhere* that allows you to go back and 'unenable' the error message.  I don't have a ICD2 here with me, so I cant seem to locate what tab its under, but I've done that in the past as well, and have to go uncheck the box.  It doesn;t seem to show up until you connect and try to program.

"Thomas C. Sefranek" <tcs@cmcorp.com> wrote:  Connecting to MPLAB ICD 2
...Connected
Setting Vdd source to MPLAB ICD 2
Target Device PIC18F4585 found, revision = Rev 0x4
...Reading ICD Product ID
Running ICD Self Test
...Passed
MPLAB ICD 2 Ready
Programming Target...
ICDWarn0042: Protect bit (CP_3 : Code Protect 00C000-00FFFF) is enabled.
MPLAB ICD 2 will not enter debug mode in this configuration. Do you wish to
disable this setting?
ICD0200: Operation Aborted (Warning 41).
ICD0275: Programming failed.
MPLAB ICD 2 Ready

The PIC18F4585 Does NOT have CP 3!
I accidentally must have answered the popup window with this warning and now
I can't debug, as there is no apparent way to fix this warning.

Any Idea's?

Tom 

*
| __O Thomas C. Sefranek WA1RHP@ARRL.NET
|_-\<,_ Amateur Radio Operator: WA1RHP
(*)/ (*) Bicycle mobile on 145.41MHz PL74.4

ARRL Instructor, Technical Specialist, VE Contact.
http://hamradio.cmcorp.com/inventory/Inventory.html
http://www.harvardrepeater.org

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist


       
---------------------------------
Looking for last minute shopping deals?  Find them fast with Yahoo! Search.
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist