On Dec 5, 2007 10:13 AM, Brian Kraut wrote: > The resistors now are mounted by their leads between the connector and the > LED and are bent to be just under the level of the potting compound. Just > complicates things to do inductors off the PCB. Again, if I could fit the > inductor and everything else on a board 15mm square and 6mm tall it would > fit. I would think that would be pretty trivial. At 1 MHz the inductors are very small, as others have said, if you can fit a 1206 SMD resistor, then you can fit the inductor. You asked for advice, you've been given a fair bit. :) -- http://www.piclist.com PIC/SX FAQ & list archive View/change your membership options at http://mailman.mit.edu/mailman/listinfo/piclist