In SX Microcontrollers, SX/B Compiler and SX-Key Tool, Jimbo wrote:

Thanks Tom,
 I will have a peek after the company leaves later today.

Hi Joe,
 I tried instead of using the tempurature vaiable to make a simple counter and that displayed the counting fine. I also tried making the variable equal a certain number and that number is didplayed ok. I think the problem is in how the code is reading the chip or initializing the chip. I must be missing something sutle. I was hoping it might be obvious to someone with more experience. I will also try to locate my parallax o scope and see if the chip is getting input and outputing something. Even though I quadrupled checked the wiring, at this point there might still be a hardware issue. 
Thanks to all,
Jim W.

---------- End of Message ----------


You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=232042#m232230

Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com

The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2007 (http://www.dotNetBB.com)