Jim

the forum has a thread describing the lack of Linux knowledge that the devs
posses. People have offered to help port it, but haven't followed through as
of yet.

Apart from that, PiKdev is what I have learned to enjoy, even though it is
tied to KDE. I would of course check the new
software out before discarding it.

Wed



2007/10/31, PAUL James <James.Paul@colibrys.com>:
>
>
> Wed,
>
> This too would be a question for the support group at BasicMicro.
> I don't use PiKdev, so I can't say.   I haven't looked at the protocol
> going to the programmer as I use the S/W supplied by BasicMicro.
> It works very well, so I haven't had the need to look further.
> In addition, since it works so well, I use the extra time to add
> functionality,
> change features, and/or debug the apps as appropriate.  This doesn't
> give me
> much time for experimentation.   However, now that you've brought it up,
> I may
> take a look just for the heck of it next time I use it.   I'm not sure
> exactly
> when that'll be though.
>
>
>
>                                                                 Regards,
>
>                                                                   Jim
>
>
>
> -----Original Message-----
> From: piclist-bounces@mit.edu [mailto:piclist-bounces@mit.edu] On Behalf
> Of M Wedin
> Sent: Wednesday, October 31, 2007 1:36 PM
> To: Microcontroller discussion list - Public.
> Subject: Re: [PIC]: Need suggestions for off board programmer
>
> I don't necessarily need the software if it works with standardised
> protocols. I would be overjoyed if it accepts signals produced by
> PiKdev.
>
> Wed
>
>
>
> 2007/10/31, Olin Lathrop <olin_piclist@embedinc.com>:
> >
> > M Wedin wrote:
> > > Olin, how well supported is your programmer under Linux?
> >
> > It comes with Windows software only.  The protocol and host software
> > is all open and I'd be willing to help out anyone that either wants to
>
> > port my stuff or create their own on Linux.
> >
> >
> > ********************************************************************
> > Embed Inc, Littleton Massachusetts, http://www.embedinc.com/products
> > (978) 742-9014.  Gold level PIC consultants since 2000.
> > --
> > http://www.piclist.com PIC/SX FAQ & list archive View/change your
> > membership options at http://mailman.mit.edu/mailman/listinfo/piclist
> >
> --
> http://www.piclist.com PIC/SX FAQ & list archive View/change your
> membership options at http://mailman.mit.edu/mailman/listinfo/piclist
>
> --
> http://www.piclist.com PIC/SX FAQ & list archive
> View/change your membership options at
> http://mailman.mit.edu/mailman/listinfo/piclist
>
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist