I'm starting to make an LED headlamp with a small PIC12F629  as the "brain". The PIC use PWM to drive a IRL3103 Mosfet connected to a single power LED. The power source is a 3.7V Li-Ion battery so I need a voltage doubler to drive the gate.
Resuming, I need to implement a PWM channel by software and to create a "squarewave" to drive the voltage doubler.

Final question:  as the PIC is INTOSC running (4Mhz), can I use the CLKOUT signal on OSC2/GP4 (Fosc/4) for the voltage doubler? 


thanks
Marco


-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist