I could be convinced to share the good parts of the LCD driver. You DO understand I write in assembly, right? * | __O Thomas C. Sefranek WA1RHP@ARRL.NET |_-\<,_ Amateur Radio Operator: WA1RHP (*)/ (*) Bicycle mobile on 145.41MHz PL74.4 ARRL Instructor, Technical Specialist, VE Contact. http://hamradio.cmcorp.com/inventory/Inventory.html http://www.harvardrepeater.org -----Original Message----- From: piclist-bounces@mit.edu [mailto:piclist-bounces@mit.edu] On Behalf Of alan smith Sent: Tuesday, October 16, 2007 6:49 PM To: Microcontroller discussion list - Public. Subject: RE: [EE] Bistable Displays Is your NKK code public? I was getting some samples of these and thought I might play with them some. "Thomas C. Sefranek" wrote: -----Original Message----- From: piclist-bounces@mit.edu [mailto:piclist-bounces@mit.edu] On Behalf Of David VanHorn Sent: Tuesday, October 09, 2007 3:43 PM To: Microcontroller discussion list - Public. Subject: Re: [EE] Bistable Displays >The NKK Smartswitches that were posted do work nicely, but you have to >refresh them rather frequently. If you had more than a couple, you'd >almost want to dedicate a controller to maintaining them. -- I run 6 NKK Smartswitches from 1 PIC18F4585. No problems running the CAN bus and other stuff. Tom * | __O Thomas C. Sefranek WA1RHP@ARRL.NET |_-\<,_ Amateur Radio Operator: WA1RHP (*)/ (*) Bicycle mobile on 145.41MHz PL74.4 ARRL Instructor, Technical Specialist, VE Contact. http://hamradio.cmcorp.com/inventory/Inventory.html http://www.harvardrepeater.org -- http://www.piclist.com PIC/SX FAQ & list archive View/change your membership options at http://mailman.mit.edu/mailman/listinfo/piclist --------------------------------- Pinpoint customers who are looking for what you sell. -- http://www.piclist.com PIC/SX FAQ & list archive View/change your membership options at http://mailman.mit.edu/mailman/listinfo/piclist -- http://www.piclist.com PIC/SX FAQ & list archive View/change your membership options at http://mailman.mit.edu/mailman/listinfo/piclist