--===============0514421532==
Content-type: text/plain; charset=US-ASCII
Content-description: Mail message body
Content-Transfer-Encoding: quoted-printable
X-MIME-Autoconverted: from 8bit to quoted-printable by pch.mit.edu id l91E4cwa016845

	Hello all,=20
	Im trying to use SLEEP with the PIC18F1320 that have some additional low=
-power=20
modes than the 16F series. The device goes into Sleep (in my case, a PRI_=
IDLE mode) but=20
don't Wake-Up on interrupt (Timer1 interrupt). Ive already tried set Time=
r1 with both=20
oscilator sources (primary clock - Fosc/4 and external XTAL on RB6 pin) w=
ith no success.=20
Im using PROTEUS 6.9 to simulate, but assembled the circuit in a protoboa=
rd too, and no=20
one works.=20
	If someone could help me, please,

		Best regards,=20

			Dagmar

--=20
Esta mensagem foi verificada pelo sistema de antiv=EDrus e
 acredita-se estar livre de perigo.


--===============0514421532==
Content-Type: text/plain; charset="us-ascii"
MIME-Version: 1.0
Content-Disposition: inline
Content-Transfer-Encoding: 7bit

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist

--===============0514421532==--