Can't put my hands on my IDT databook, but might look at them. Vasile Surducan wrote: Hi, I need a 1:8 (ok 1:10 is good too) differential LVDS clock driver with bank enable (individual clk enabling option for every output) and very good clock skew parameters. It seems there is an industrial standard of serial programmable 1:10 LVDSin/LVDSout buffer (STLVD111 or PCK2111, etc) but I dislike the serial programming. I need one with parallel enabling feature, being driven directly by the PCIe card detect signal, like SN65LVDS108 (which seems it can't be used for a PCIe clk because of it's huge skew). Unfortunately I didn't found any which met the PCIe clk requirement. Any clue appreciated. thx, Vasile -- http://www.piclist.com PIC/SX FAQ & list archive View/change your membership options at http://mailman.mit.edu/mailman/listinfo/piclist --------------------------------- Got a little couch potato? Check out fun summer activities for kids. -- http://www.piclist.com PIC/SX FAQ & list archive View/change your membership options at http://mailman.mit.edu/mailman/listinfo/piclist