--===============2078771180==
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: quoted-printable
X-MIME-Autoconverted: from 8bit to quoted-printable by pch.mit.edu id l8JMpceE011132

Mike,
Poor schematic design problems?
or pc board layout design problems?
or pc board supplier problems?

Different solutions for each.

Ray


On Wed, 19 Sep 2007 08:38:46 -0500, Mike Hord wrote:
>=A0We're running into issues with a PCB- very high fall-out rate. I'm
>=A0wondering if anyone has a recommendation for a "guru" that can
>=A0provide design review services with an eye towards SI and
>=A0manufacturability (or possibly more than one to cover each of those
>=A0issues separately)?
>
>=A0In the Twin Cities, Minnesota, USA, area would be great, but I
>=A0think at this point, anywhere in the continental USA is acceptable.
>
>=A0Mike H.





--===============2078771180==
Content-Type: text/plain; charset="us-ascii"
MIME-Version: 1.0
Content-Disposition: inline
Content-Transfer-Encoding: 7bit

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist

--===============2078771180==--