Hi everyone,

 

I'm looking into making a PCI card to go into a PC to do some simple
switching. The problem I have is that I would like to talk to the PIC on
the board via RS232. It seems mad running a cable from a comm port to
the back of my PCI card to allow communication. Has anyone ever used any
IC's that create a comm. Port from the PCI bus? There must be some as
there are plenty of PCI card to serial port cards you can buy.

 

Thanks,

Graham North

 


AMX

AMX UK
Auster Road
Clifton Moor
York, North Yorkshire
United Kingdom
YO30 4GD

+44 (0) 1904 343100	office
+44 (0) 1904 343101	fax

AMX South
The Coach House
Grange Courst, Grange Road
Tongham, Surrey
United Kingdom
GU10 1DW

+44 (0) 1252 781769	office
+44 (0) 8701 991661	fax

AMX Belgium
Boerenkrijglaan, 96a
B-2260
Westerlo
Belgium


+ 32 (0) 1454 2763	office
+ 32 (0) 1454 2766	fax

######################################################################
Attention: 
This e-mail message is privileged and confidential. If you are not the 
intended recipient please delete the message and notify the sender. 
Any views or opinions presented are solely those of the author.

This email was scanned and cleared by NetIQ MailMarshal.
######################################################################
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist