William Bross wrote:

>Howard, Xiaofan,
>I can confirm that you can't key in on the button color to determine 
>whether or not your hardware is up to date or not.  My button is a red 
>one, the assy. # on the case ends in -R4, the physical PCB is a REV 5 
>and it's not the latest and greatest.  Thanks to both of you for 
>pointing out that I needed to fix my PicKit2 and pointing me to the 
>right info to do it.
>Bill
>  
>
OK, replying to my own post....  I just went back to my well lit lab 
with my big magnifyers and took a better look at my PicKit2 board.  The 
REV 5 PCB directly from Microchip DOES have the mods already made.  Look 
for the C6 designator.  It has R34 which is a 2.7K resistor mounted 
directly on top of it.  R21 has been changed to 1K. And R35 and R36 have 
been added directly to pins 4 and 5 of J3 ICSP connector on the bottom 
side of the board.  I just wanted to fix my earlier mis-information 
before I inconvenienced anyone.

Bill
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist