In SX Microcontrollers, SX/B Compiler and SX-Key Tool, tdg8934 wrote:

UPDATES ARE HERE !!!

I was able to get the first stage of this project going meaning I got it to work with a single color (green) so far... More to come using more colors soon.

I have updated the SX/B code in the original post to work with 40 columns. Not overly bright but not too shabby either for a standard PDB 5vdc source. The current is minimal at under ~300 mA. I will look at using more voltage / current in the future but for now it is not bad at all. 

I also found out that the new RobOymplic schematic that I used to draw my SX-28 connections were way off. I used the Professional Development board schematic to update Page 2 of 3 of the BMP. Now available for download as well. 

Parallax should look at their RobOlympic schematic and fix it at some point. 

I did notice that JonnyMac's Badge code that I modified ran out of memory so I had to comment out the dancing robot's for now. I understand that there is alot going on and I will need to work with what I have. No fault to JonnyMac on this ... simply an addressing issue for the SX-28 I beleive. 

I will post a YouTube Video next so watch for it !!!

---------- End of Message ----------


You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=211040#m211268

Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com

The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2007 (http://www.dotNetBB.com)