In SX Microcontrollers, SX/B Compiler and SX-Key Tool, rwsenser wrote:

Hi Peter,

 

Greetings.

 

Relative to "Now if only the CLRB 4.FSR_7 after a BANK ddd with ddd>=128" you might give the attached batch script a try.  At the beginning of it are comments that show how to run it under Windows.

 

It just replaces all the CLRB 4.FSR_7 instructions by NOPs.  My research shows that the CLRB instruction, after the BANK instruction, is not needed on the SX18 and SX28 anyway.  I believe the SX48 is a different case.

 

Maybe this 'hack' will be useful until a real fix for CC1B is available.  I'm not inclined to put a 'hack' like this in CC1B2SX.

 

I've not tested this heavily -- the output from it does assemble correctly.

 

Thanks,

RW Senser

---------- End of Message ----------


You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=207987#m209876

Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com

The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2007 (http://www.dotNetBB.com)