Thank you Kevin, Carl and Mike.

On 8/18/07, Kevin Timmerman <lists@pcmx.net> wrote:
>
> http://www.geocities.com/vbmcomputers/pinout/#10
>
> The pinout shown in chart #15 is by far the most common. It is what
> you get when a 10 pin IDC header and DE9 IDC connector are used.
>
>
>
> At 11:15 AM 8/18/2007, you wrote:
> >There are two standards of wiring the 2x5 pin motherboard RS232
> >    connector to the DB9 connector mounted on the PC rear pannel.
> >    I want to use such cable connection for a product requiring a
> >    debbuging over the RS232. Any link to the specification of those
> >    cables ? Right now I have no one around to measure it and get the
> >    schematic.
> >    thx,
> >    Vasile
> >--
> >http://www.piclist.com PIC/SX FAQ & list archive
> >View/change your membership options at
> >http://mailman.mit.edu/mailman/listinfo/piclist
>
> --
> http://www.piclist.com PIC/SX FAQ & list archive
> View/change your membership options at
> http://mailman.mit.edu/mailman/listinfo/piclist
>
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist