http://www.geocities.com/vbmcomputers/pinout/#10

The pinout shown in chart #15 is by far the most common. It is what 
you get when a 10 pin IDC header and DE9 IDC connector are used.



At 11:15 AM 8/18/2007, you wrote:
>There are two standards of wiring the 2x5 pin motherboard RS232
>    connector to the DB9 connector mounted on the PC rear pannel.
>    I want to use such cable connection for a product requiring a
>    debbuging over the RS232. Any link to the specification of those
>    cables ? Right now I have no one around to measure it and get the
>    schematic.
>    thx,
>    Vasile
>--
>http://www.piclist.com PIC/SX FAQ & list archive
>View/change your membership options at
>http://mailman.mit.edu/mailman/listinfo/piclist

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist