Watchdog timer enabled?

RP

On 13/08/07, John Chung <kravnus@yahoo.com> wrote:
>
> --- Greg Rhoads <gkrhoads@verizon.net> wrote:
>
> > Hi people,
> >
> >       Im new at this stuff so bear with me.  I have a
> > PICkit 2 wi a low pin count
> > demo board, 16f690. I bought this display
> > http://www.piclist.com/techref/io/lcd/panel1.htm .
> > When i run my program it
> > stops after the first 8 characters on the first
> > line.  I've tried different
> > delays and no luck.  If I change the program and
> > only write 8 characters to
> > the first line it goes to the second line and writes
> > the first 8 characters.
> > By a coencidence I applyed 2v to the circuit then
> > 5v.  Then it writes both
>  From this I can gather that your wiring and you
> initialization is correct. What is it suppose to do
> after the first 8 characters?
>
>
>
>
> > lines completely.  As I see it when I apply 2v first
> > the processor runs and
> > puts the data to the display controler.  When I
> > raise the voltage to 5v the
> > display turns on and shows all.  Any ideas ?
> >
>  The LCD requires 5volts to run. Just stick to 5volts
> supply. DO not attempt to do a reverse voltage*destroy
> the LCD*
>
>
> John
>
>
>
> ____________________________________________________________________________________Ready for the edge of your seat?
> Check out tonight's top picks on Yahoo! TV.
> http://tv.yahoo.com/
> --
> http://www.piclist.com PIC/SX FAQ & list archive
> View/change your membership options at
> http://mailman.mit.edu/mailman/listinfo/piclist
>
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist