>-----Original Message-----
>From: piclist-bounces@mit.edu [mailto:piclist-bounces@mit.edu] 
>On Behalf Of David VanHorn
>Sent: 30 July 2007 16:49
>To: Microcontroller discussion list - Public.
>Subject: Re: [EE] Radio modules
>
>
>> > I need >10mbps. Bluetooth, Zigbee, and wifi are not suitable.
>> The current Bluetooth and Zigbee standard are much slower than 
>> 10Mbps...
>
>Hence the disqualification.
>Wifi is performing rather dismally at the moment, with an 
>802.11G link giving about 3mbps of actual throughput.

Is this possibly down to signal strength and/or interference issues?  802.11G should give significantly better throughput than that.  Would 802.11N be a possibility?

What are the range requirements?  Is it line of sight?

Regards

Mike


=======================================================================
This e-mail is intended for the person it is addressed to only. The
information contained in it may be confidential and/or protected by
law. If you are not the intended recipient of this message, you must
not make any use of this information, or copy or show it to any
person. Please contact us immediately to tell us that you have
received this e-mail, and return the original to us. Any use,
forwarding, printing or copying of this message is strictly prohibited.
No part of this message can be considered a request for goods or
services.
=======================================================================

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist