> If you use  ICSP, I know no other RELIABLE way to kill the 
> effects of a floating LVP pin except with a 10K to GND

True, but there is no law that that resistor has to be part of the
target circuit. A Wisp628 has a dedicated line that is pulled down
during the target reset. Connect this to the LVP pin and forget about
it. 

Wouter van Ooijen

-- -------------------------------------------
Van Ooijen Technische Informatica: www.voti.nl
consultancy, development, PICmicro products
docent Hogeschool van Utrecht: www.voti.nl/hvu
 
 

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist