On 6/29/07, soliton <soliton.list@gmail.com> wrote:
> On 6/29/07, wouter van ooijen <wouter@voti.nl> wrote:
> >
> > > One interesting feature is the UART support.
> > >
> > > - UART Communication Tool ""Tools -> UART Tool" allows PICkit
> > > 2 to connect to MCU TX and RX pins for debug & development IO.
> >
> > whow, someone finally copied that idea :)
> >
> > Wouter van Ooijen
> >
> > Yes, it is a very nice idea. :)
> It seems that PICKit2 is going to be added by so many features.
> I hope someday they would implement ICD2 in this device :D

Um, did you miss Xiaofan's message of June 17?

I quote:

"
http://www.microchip.com/stellent/idcplg?IdcService=3DSS_GET_PAGE&nodeId=3D=
1406&dDocName=3Den027813

If you have the older PICkit 2 units, make sure you read the
following Microchip forum posts from the current developer.
http://forum.microchip.com/tm.aspx?m=3D245280

With MPLAB 7.61, PICkit 2 now supports debugging of many popular
PIC16F and PIC18F MCUs.

1. Midrange =96 Programming & Debugging inside MPLAB 7.61
PIC12F683*
PIC16F684*, 685*, 687*
PIC16F688*, 689*, 690*
(* denotes that it needs a special ICD header just like
MPLAB ICD2)
PIC16F737, 747, 767, 777
PIC16F87, 88
PIC16F818, 819
PIC16F873A, 874A, 876A, 877A
PIC16F883, 884, 886, 887
PIC16F913, 914, 916, 917
PIC16F946

2. PIC18F =96 Programming & Debugging inside MPLAB 7.61
PIC18F2410, 2420, 2423, 2480
PIC18F2510, 2520, 2523, 2580
PIC18F4410, 4420, 4423, 4480
PIC18F4510, 4520, 4523, 4580
PIC18F6310, 6390, 6410, 6490
PIC18F8310, 8390, 8410, 8490
PIC18F45K20, 25K20

So now PICkit 2 is more and more like poor man's MPLAB ICD2.

Xiaofan
"

Regards,
Mark
markrages@gmail
-- =

Mark Rages, Engineer
Midwest Telecine LLC
markrages@midwesttelecine.com

-- =

http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist