I've been using this http://tinyurl.com/yu8py9 for some time, it is cheap and quality is apparently good. I say "apparently" because I've never tested its fire-contents capabilities - and have no interest in doing that ever - as you may guess. But for the price I feel better charging my lipos on this bag. Additionally, a temp detector in the interior of the bag will alarm with a big beep if the lipo start going over 50=BA. I consider both measures enough to work with lipos. 2007/6/25, Sean Breheny : > > I've listened to several piclist threads about the dangers of LiPo's > and I'm puzzled. Did they get worse (in terms of safety) in the last > couple of years? > > I used LiPo's in 2002, pretty soon after they became widely available. > Back then, they had very good capacity but poor current sourcing > ability (high internal resistance). I used a large number of them > (about 60) for a model helicopter project. Out of all those, I had two > burst. One because I accidentally charged it with the charger set to > two cells when there was only one. The other because I was running it > above max rated current. In both cases, there was no explosion, no > fire - the battery casing just bulged and then opened along a seam, > releasing a mildly noxious gas. > > Sean > > > On 6/24/07, David VanHorn wrote: > > I use a modified ammo can at home, and a pottery flowerpot/plate at > work. > > Won't prevent a fire, but it will contain one. > > -- > > http://www.piclist.com PIC/SX FAQ & list archive > > View/change your membership options at > > http://mailman.mit.edu/mailman/listinfo/piclist > > > -- > http://www.piclist.com PIC/SX FAQ & list archive > View/change your membership options at > http://mailman.mit.edu/mailman/listinfo/piclist > -- = Ariel Rocholl Madrid, Spain -- = http://www.piclist.com PIC/SX FAQ & list archive View/change your membership options at http://mailman.mit.edu/mailman/listinfo/piclist