In SX Microcontrollers, SX/B Compiler and SX-Key Tool, DosManDan wrote:

I was really hoping to clean the code up first. This was just my proof of concept code, so it isn't as clean as it should be.

My SX-28 is hooked up to a keypad and an LCD screen. So depending on where you are looking at the code, you might want to remove some of the extra stuff. It should work fine as is, but you probably want to use debug statements where you see things the mention LCD. My prototype has a Receiver AND a Transmitter on it. It talks to other boards that have the same configuration. I'll put the BS/2 code here too, since you mentioned needing that. The BS/2 code receives the signal from the SX-28, then returns a character to acknowledge.

I was going to post this as a finished project when I got it all cleaned up....so I hope people aren't to critical of it right now.

Dan

---------- End of Message ----------


You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=195677#m198214

Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com

The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2007 (http://www.dotNetBB.com)