Pricing is important to know and all the signals should be on the  
header,
just do not install the set of pins.
Cedric

>
> On Jun 22, 2007, at 4:21 PM, alan smith wrote:
>
> SPI for doing firmware updates to the BlueCore-4 processor
>
>   PCM connections since BT is used for audio....and thats the way  
> its going to goinza and gooutza from it.
>
>
>   So how much does this module go for in qty?
>
>
> Vitaliy <spam@maksimov.org> wrote:
>   Our company is working with Roving Networks to develop a board to  
> integrate
> it into our products (to implement a wireless serial port). The  
> plan is to
> use 2 mm female receptacle on the Bluetooth module (2x3, 2x4, or  
> 2x5), and
> male header pins on the target device.
>
> While we only need a handful of pins for use with our stuff (RxD,  
> TxD, Gnd,
> Pwr, RESET), I wanted to see whether there will be demand for these  
> modules
> from other people on this list, and if so, which pins should be  
> included in
> the header.
>
> Here's the datasheet for the module, the pinout is on the last page:
>
> http://www.rovingnetworks.com/documents/RN-41.pdf
>
> Your feedback is appreciated.
>
> Vitaliy
>
>
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist