Our company is working with Roving Networks to develop a board to integrate 
it into our products (to implement a wireless serial port). The plan is to 
use 2 mm female receptacle on the Bluetooth module (2x3, 2x4, or 2x5), and 
male header pins on the target device.

While we only need a handful of pins for use with our stuff (RxD, TxD, Gnd, 
Pwr, RESET), I wanted to see whether there will be demand for these modules 
from other people on this list, and if so, which pins should be included in 
the header.

Here's the datasheet for the module, the pinout is on the last page:

http://www.rovingnetworks.com/documents/RN-41.pdf

Your feedback is appreciated.

Vitaliy


-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist