>-----Original Message-----
>From: piclist-bounces@mit.edu [mailto:piclist-bounces@mit.edu] 
>On Behalf Of Howard Winter
>Sent: 21 June 2007 13:13
>To: Microcontroller discussion list - Public.
>Subject: Re: [OT] Units rant
>
>
>I believe Metric spanners* are also measured across the flats, 
>so a 13mm spanner will work on a 1/2" UNx bolt if it's not 
>done up too tightly! :-)
>

* wrenches for our US viewers ;)

Mike

=======================================================================
This e-mail is intended for the person it is addressed to only. The
information contained in it may be confidential and/or protected by
law. If you are not the intended recipient of this message, you must
not make any use of this information, or copy or show it to any
person. Please contact us immediately to tell us that you have
received this e-mail, and return the original to us. Any use,
forwarding, printing or copying of this message is strictly prohibited.
No part of this message can be considered a request for goods or
services.
=======================================================================

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist