In SX Microcontrollers, SX/B Compiler and SX-Key Tool, datacps wrote:

Thanks for the info Quirk  .. what is strange is that all the sample code that come with the sx/key work perfect. I can flash the LED and I did just about every thing to the code to change time and delays and it all works fine. The Pro board has the VSS and VDD on the side where the stamp chips goes. those are the only Grounds i see on the boards that I can use. I did the LCD test and it is getting power and it does display the Parallax text. Just look at the code that jonny put up and run debug and tell me if you get the error I get. There is something different about it because the other test code work perfect. I will do as you ask and upload the image later today. I did try to upload it last night but you already know it was to big and I will have to do it the way you are stating. Even if I have a LCD problem I can't get the code to debug or program the Chip in sx/key. Thanks again Quirk I will upload later on today...

---------- End of Message ----------


You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=197251#m197863

Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com

The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2007 (http://www.dotNetBB.com)