Also try to configure your oscillator in a HS mode ( > 4 MHz )

Peter P. a =E9crit :
> Try to use a regulated supply for starters and pull MCLR up to Vdd with 1=
0kOhms.
> A regulated supply would be a 5V1 zener across Vdd and Vss and Vdd suppli=
ed from
> the wall wart through a 50 ohm 1W resistor. Don't forget decoupling at th=
e chip
> (10uF should be enough).
>
> Peter P.
>
>   =


-- =

http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist