In SX Microcontrollers, SX/B Compiler and SX-Key Tool, robotworkshop wrote:

Hello,

As most of you are probably aware, the pinout for pins 1-14 on the SX28 chip are different on the surface mount and DIP versions.

I just took a closer look at the SX28 Protoboard and it appears that the pads for the 28-pin DIP (w/wider spacing) match up with a regular 28-pin ZIF socket and also the DIP version of the chip.

So, I should be able to unsolder that surface mount SX28 chip, mount my ZIF socket in it's place, and have a nice way to pre-program the SX28 DIP chips.

Has anyone else tried this?

Robert

---------- End of Message ----------


You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=197468

Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com

The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2007 (http://www.dotNetBB.com)