piclist-bounces@mit.edu wrote:
> Alan B. Pearce <A.B.Pearce <at> rl.ac.uk> writes:
>>> As long as the flux says 'no-clean' flux you can trust it
> to be so.
>> I guess that depends on the reliability you want from the circuit
> 
> I do not agree. 

I do not agree either. We've run into trouble with no-clean 
before. However, it must be said that, as in most things engineering,
it depends. Circuit reliability with no-clean flux depends not
only on your use-environment, but also on the mfg process. Part
of the engineer's job is to evaluate all these factors...


-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist