> The busy flag is opertational during this period, so if you have R/W
> connected to a pin the safest method is to poll the busy register after
> power on until clear (with a suitable timeout).  I don't know if the
> clones do this or not.

Clones are usually pretty good and I try to stick with what I know,
just expect the odd anomaly now and then. When using the minimum
standard interface, with R/W tied low, Busy isn't available of course.
That's a h/w up side, possibly a s/w (timing) down side

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist